Struct nvapi::DisplayIdsFlags []

pub struct DisplayIdsFlags { /* fields omitted */ }

Bitfield in NV_GPU_DISPLAYIDS

Methods

impl DisplayIdsFlags

DYNAMIC: DisplayIdsFlags = DisplayIdsFlags{bits: 1,}

This display is part of MST topology and it's a dynamic

MST_ROOT_NODE: DisplayIdsFlags = DisplayIdsFlags{bits: 2,}

This displayID belongs to a multi stream enabled connector(root node). Note that when multi stream is enabled and a single multi stream capable monitor is connected to it, the monitor will share the display id with the RootNode.

ACTIVE: DisplayIdsFlags = DisplayIdsFlags{bits: 4,}

This display is being actively driven

CLUSTER: DisplayIdsFlags = DisplayIdsFlags{bits: 8,}

This display is the representative display

OS_VISIBLE: DisplayIdsFlags = DisplayIdsFlags{bits: 16,}

This display is reported to the OS

WIRELESS: DisplayIdsFlags = DisplayIdsFlags{bits: 32,}

This display is wireless

CONNECTED: DisplayIdsFlags = DisplayIdsFlags{bits: 64,}

This display is connected

RESERVED_INTERNAL: DisplayIdsFlags = DisplayIdsFlags{bits: 130944,}

Do not use

PHYSICALLY_CONNECTED: DisplayIdsFlags = DisplayIdsFlags{bits: 131072,}

this display is a phycially connected display; Valid only when is Connected bit is set

RESERVED: DisplayIdsFlags = DisplayIdsFlags{bits: 4294705152u32,}

must be zero

Important traits for DisplayIdsFlags

Returns an empty set of flags.

Important traits for DisplayIdsFlags

Returns the set containing all flags.

Returns the raw value of the flags currently stored.

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

Important traits for DisplayIdsFlags

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

Returns true if no flags are currently stored.

Returns true if all flags are currently set.

Returns true if there are flags common to both self and other.

Returns true all of the flags in other are contained within self.

Inserts the specified flags in-place.

Removes the specified flags in-place.

Toggles the specified flags in-place.

Inserts or removes the specified flags depending on the passed value.

Trait Implementations

impl Sub<DisplayIdsFlags> for DisplayIdsFlags

The resulting type after applying the - operator.

Important traits for DisplayIdsFlags

Returns the set difference of the two sets of flags.

impl Iterator for DisplayIdsFlags
[src]

The type of the elements being iterated over.

[src]

Advances the iterator and returns the next value. Read more

1.0.0
[src]

Returns the bounds on the remaining length of the iterator. Read more

1.0.0
[src]

Consumes the iterator, counting the number of iterations and returning it. Read more

1.0.0
[src]

Consumes the iterator, returning the last element. Read more

1.0.0
[src]

Returns the nth element of the iterator. Read more

Important traits for StepBy<I>
[src]

🔬 This is a nightly-only experimental API. (iterator_step_by)

unstable replacement of Range::step_by

Creates an iterator starting at the same point, but stepping by the given amount at each iteration. Read more

Important traits for Chain<A, B>
1.0.0
[src]

Takes two iterators and creates a new iterator over both in sequence. Read more

Important traits for Zip<A, B>
1.0.0
[src]

'Zips up' two iterators into a single iterator of pairs. Read more

Important traits for Map<I, F>
1.0.0
[src]

Takes a closure and creates an iterator which calls that closure on each element. Read more

1.21.0
[src]

Calls a closure on each element of an iterator. Read more

Important traits for Filter<I, P>
1.0.0
[src]

Creates an iterator which uses a closure to determine if an element should be yielded. Read more

Important traits for FilterMap<I, F>
1.0.0
[src]

Creates an iterator that both filters and maps. Read more

Important traits for Enumerate<I>
1.0.0
[src]

Creates an iterator which gives the current iteration count as well as the next value. Read more

Important traits for Peekable<I>
1.0.0
[src]

Creates an iterator which can use peek to look at the next element of the iterator without consuming it. Read more

Important traits for SkipWhile<I, P>
1.0.0
[src]

Creates an iterator that [skip]s elements based on a predicate. Read more

Important traits for TakeWhile<I, P>
1.0.0
[src]

Creates an iterator that yields elements based on a predicate. Read more

Important traits for Skip<I>
1.0.0
[src]

Creates an iterator that skips the first n elements. Read more

Important traits for Take<I>
1.0.0
[src]

Creates an iterator that yields its first n elements. Read more

Important traits for Scan<I, St, F>
1.0.0
[src]

An iterator adaptor similar to [fold] that holds internal state and produces a new iterator. Read more

Important traits for FlatMap<I, U, F>
1.0.0
[src]

Creates an iterator that works like map, but flattens nested structure. Read more

Important traits for Fuse<I>
1.0.0
[src]

Creates an iterator which ends after the first [None]. Read more

Important traits for Inspect<I, F>
1.0.0
[src]

Do something with each element of an iterator, passing the value on. Read more

Important traits for &'a mut I
1.0.0
[src]

Borrows an iterator, rather than consuming it. Read more

1.0.0
[src]

Transforms an iterator into a collection. Read more

1.0.0
[src]

Consumes an iterator, creating two collections from it. Read more

[src]

🔬 This is a nightly-only experimental API. (iterator_try_fold)

An iterator method that applies a function as long as it returns successfully, producing a single, final value. Read more

1.0.0
[src]

An iterator method that applies a function, producing a single, final value. Read more

1.0.0
[src]

Tests if every element of the iterator matches a predicate. Read more

1.0.0
[src]

Tests if any element of the iterator matches a predicate. Read more

1.0.0
[src]

Searches for an element of an iterator that satisfies a predicate. Read more

1.0.0
[src]

Searches for an element in an iterator, returning its index. Read more

1.0.0
[src]

Searches for an element in an iterator from the right, returning its index. Read more

1.0.0
[src]

Returns the maximum element of an iterator. Read more

1.0.0
[src]

Returns the minimum element of an iterator. Read more

1.6.0
[src]

Returns the element that gives the maximum value from the specified function. Read more

1.15.0
[src]

Returns the element that gives the maximum value with respect to the specified comparison function. Read more

1.6.0
[src]

Returns the element that gives the minimum value from the specified function. Read more

1.15.0
[src]

Returns the element that gives the minimum value with respect to the specified comparison function. Read more

Important traits for Rev<I>
1.0.0
[src]

Reverses an iterator's direction. Read more

1.0.0
[src]

Converts an iterator of pairs into a pair of containers. Read more

Important traits for Cloned<I>
1.0.0
[src]

Creates an iterator which [clone]s all of its elements. Read more

Important traits for Cycle<I>
1.0.0
[src]

Repeats an iterator endlessly. Read more

1.11.0
[src]

Sums the elements of an iterator. Read more

1.11.0
[src]

Iterates over the entire iterator, multiplying all the elements Read more

1.5.0
[src]

Lexicographically compares the elements of this Iterator with those of another. Read more

1.5.0
[src]

Lexicographically compares the elements of this Iterator with those of another. Read more

1.5.0
[src]

Determines if the elements of this Iterator are equal to those of another. Read more

1.5.0
[src]

Determines if the elements of this Iterator are unequal to those of another. Read more

1.5.0
[src]

Determines if the elements of this Iterator are lexicographically less than those of another. Read more

1.5.0
[src]

Determines if the elements of this Iterator are lexicographically less or equal to those of another. Read more

1.5.0
[src]

Determines if the elements of this Iterator are lexicographically greater than those of another. Read more

1.5.0
[src]

Determines if the elements of this Iterator are lexicographically greater than or equal to those of another. Read more

impl Debug for DisplayIdsFlags

Formats the value using the given formatter. Read more

impl BitAndAssign<DisplayIdsFlags> for DisplayIdsFlags

Disables all flags disabled in the set.

impl PartialOrd<DisplayIdsFlags> for DisplayIdsFlags

This method returns an ordering between self and other values if one exists. Read more

This method tests less than (for self and other) and is used by the < operator. Read more

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

This method tests greater than (for self and other) and is used by the > operator. Read more

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl Ord for DisplayIdsFlags

This method returns an Ordering between self and other. Read more

1.21.0
[src]

Compares and returns the maximum of two values. Read more

1.21.0
[src]

Compares and returns the minimum of two values. Read more

impl Copy for DisplayIdsFlags

impl Not for DisplayIdsFlags

Important traits for DisplayIdsFlags

Returns the complement of this set of flags.

impl FromIterator<DisplayIdsFlags> for DisplayIdsFlags

Important traits for DisplayIdsFlags

impl BitOr<DisplayIdsFlags> for DisplayIdsFlags

Important traits for DisplayIdsFlags

Returns the union of the two sets of flags.

impl Serialize for DisplayIdsFlags
[src]

[src]

impl UpperHex for DisplayIdsFlags

impl Binary for DisplayIdsFlags

impl Clone for DisplayIdsFlags

Important traits for DisplayIdsFlags

Returns a copy of the value. Read more

1.0.0
[src]

Performs copy-assignment from source. Read more

impl Extend<DisplayIdsFlags> for DisplayIdsFlags

impl Default for DisplayIdsFlags
[src]

Important traits for DisplayIdsFlags
[src]

Returns the "default value" for a type. Read more

impl PartialEq<DisplayIdsFlags> for DisplayIdsFlags

This method tests for self and other values to be equal, and is used by ==. Read more

This method tests for !=.

impl BitXorAssign<DisplayIdsFlags> for DisplayIdsFlags

Toggles the set of flags.

impl LowerHex for DisplayIdsFlags

impl BitOrAssign<DisplayIdsFlags> for DisplayIdsFlags

Adds the set of flags.

impl Eq for DisplayIdsFlags

impl Octal for DisplayIdsFlags

impl SubAssign<DisplayIdsFlags> for DisplayIdsFlags

Disables all flags enabled in the set.

impl BitAnd<DisplayIdsFlags> for DisplayIdsFlags

Important traits for DisplayIdsFlags

Returns the intersection between the two sets of flags.

impl Hash for DisplayIdsFlags

Feeds this value into the given [Hasher]. Read more

1.3.0
[src]

Feeds a slice of this type into the given [Hasher]. Read more

impl<'de> Deserialize<'de> for DisplayIdsFlags
[src]

[src]

impl BitXor<DisplayIdsFlags> for DisplayIdsFlags

Important traits for DisplayIdsFlags

Returns the left flags, but with all the right flags toggled.