Crate input_linux_sys [−] [src]
Structs
Enums
| Errno | |
| Error |
Nix Error Type |
Constants
Functions
| ev_erase_ff⚠ |
Erase a force effect |
| ev_get_abs⚠ |
get abs value/limits |
| ev_get_bit⚠ |
get event bits |
| ev_get_effects⚠ |
Report number of effects playable at the same time |
| ev_get_id⚠ |
get device ID |
| ev_get_key⚠ |
get global key state |
| ev_get_keycode⚠ |
get keycode |
| ev_get_keycode_v2⚠ |
get keycode |
| ev_get_led⚠ |
get all LEDs |
| ev_get_mask⚠ |
Retrieve current event mask |
| ev_get_mtslots⚠ |
get MT slot values |
| ev_get_name⚠ |
get device name |
| ev_get_phys⚠ |
get physical location |
| ev_get_prop⚠ |
get device properties |
| ev_get_rep⚠ |
get repeat settings |
| ev_get_snd⚠ |
get all sounds status |
| ev_get_sw⚠ |
get all switch states |
| ev_get_uniq⚠ |
get unique identifier |
| ev_get_version⚠ |
get driver version |
| ev_grab⚠ |
Grab/Release device |
| ev_revoke⚠ |
Revoke device access |
| ev_send_ff⚠ |
send a force effect to a force feedback device |
| ev_set_abs⚠ |
set abs value/limits |
| ev_set_clockid⚠ |
Set clockid to be used for timestamps |
| ev_set_keycode⚠ |
set keycode |
| ev_set_keycode_v2⚠ |
set keycode |
| ev_set_mask⚠ |
Set event mask |
| ev_set_rep⚠ |
set repeat settings |
| ui_abs_setup⚠ |
Set absolute axis information for the device to setup |
| ui_begin_ff_erase⚠ | |
| ui_begin_ff_upload⚠ | |
| ui_dev_create⚠ | |
| ui_dev_destroy⚠ | |
| ui_dev_setup⚠ |
Set device parameters for setup |
| ui_end_ff_erase⚠ | |
| ui_end_ff_upload⚠ | |
| ui_get_sysname⚠ |
get the sysfs name of the created uinput device |
| ui_get_version⚠ |
Return version of uinput protocol |
| ui_set_absbit⚠ | |
| ui_set_evbit⚠ | |
| ui_set_ffbit⚠ | |
| ui_set_keybit⚠ | |
| ui_set_ledbit⚠ | |
| ui_set_mscbit⚠ | |
| ui_set_phys⚠ | |
| ui_set_propbit⚠ | |
| ui_set_relbit⚠ | |
| ui_set_sndbit⚠ | |
| ui_set_swbit⚠ |
Type Definitions
| Result |
Nix Result Type |